Standard version (Silent) B2ESRs
Scroll down for B2ESRt (Talking) version
Measurement range: 0.001 to 99 ohms, auto-ranging
Peak voltage across capacitor under test: 50mV or less
Power supply: 2x AA cells which can be NiMH rechargeables
Controls: Single push button for power on/off
Dimensions: 3.1 x 4.6" (79 x 117mm)
Microcontroller: PIC16F15354
Features
*No lead resistance zeroing needed
* Tests electrolytic capacitors in circuit, & test leads are non-polarized.
* Automatic power off when reading is unchanged for 5 minutes.
* Low battery voltage warning ('bA' flashes on displays every 2 seconds).
* Big, easy to read 0.56 inch (14mm) blue LED displays.
This meter is exactly the same as the standard version, except that it says what's on the displays. This is for technicians who already know what are good and suspect ESR readings without looking at the chart of typical ESR figures.
The only functional difference is that the speaker volume is adjusted by holding the button down for a few seconds until the volume setting is displayed, and the volume changes by one step for each button press, including muting the sound.
EU 76€
USA-CA-AU 84€
ASIA 90€
EU 91€
USA-CA-AU 101€
ASIA 108
Values for one meter assembled and calibrated including VAT and shipping cost
(same for both versions)
Values for one meter assembled and calibrated including VAT and shipping cost
(same for both versions)